Functions:
• ?Read the old ISN in the BMW E series for the following ecus: D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, MS_E65_6L.
?Read Long ISN (SK) in the BMW E-Series from the following ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEV172225, MEVD2225DKW, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0
?Read Long ISN (SK) in the BMW F series from the following ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
?Read / write long ISN (SK) in the BMW E and F series on the bench in factory mode.
?DME / DDE does not have to be opened (only Autohex II can perform this function)
?CAS1, CAS2, CAS3 and CAS3 + read and write ISN and SK BMW E series EGS ISN suitable for CAS BMW F series EGS 6HP and 8HP EWS Resetting Coding of the BMW E and F series for all ecus (calculation of the ecucoding is made FA calculated)
?Change vehicle order, backup and restore LM, FRM, ... ETC
?Carry out diagnostic and service functions of Autohex II (reading and deleting error codes, data stream values, activations, resetting the adaptation, ...)
?Use BMW ISTA-D for Autohex II WVCI (BMW ISTA-D driver) Unlock BDC and FEM secrecy to: change BDC and FEM-VIN, change BDC and FEM-ISN, mileage for BDC and reset FEM and create a key for BDC and FEM.
?Read the ISN from MSD85, MSD87, MSV90 in the F series (you need the ISN start mode to write).
