Read the old ISN in the BMW E-Series for the following ecus: D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, MS_N6_6L0, MS_N6_6
• Read Long ISN (SK) in the BMW E series from the following ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722 MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0
• Read Long ISN (SK) in the BMW F series from the following ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
• Read / write long ISN (SK) in the BMW E and F series on the bench in factory mode.
• DME / DDE does not have to be opened (only Autohex II can perform this function) ISN Read Tricore Ecus after boot mode.
• Individual programming for each control unit of the BMW E and F series Ecu Swapping if the hardware matches.
• CAS1, CAS2, CAS3 and CAS3 + read and write ISN and SK
• BMW E series EGS ISN suitable for CAS BMW F series EGS 6HP and 8HP EWS resetting coding of the BMW E series, F series and G series for all ecus (calculation of the ecucoding is calculated from FA) BMW advanced coding (manual coding )
• Modification of the vehicle order as well as backup and restoration of LM, FRM, ... ETC
• Perform diagnostic and service functions of Autohex II (reading and deleting error codes, data stream values, activations, resetting the adaptation, ...)
• Use BMW ISTA-D for Autohex II WVCI (BMW ISTA-D driver)
• Unlock BDC and FEM secrecy in order to: change BDC and FEM-VIN, change BDC and FEM-ISN, reset mileage for BDC and FEM and create a key for BDC and FEM.
• Read and write the ISN of MSD85, MSD87, MSV90 in the F series
