Read the old ISN in the BMW E-Series for the following ecus: D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, MS_N6_6L0, MS_N6_6
• Read Long ISN (SK) in the BMW E series from the following ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722 MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0
• Read Long ISN (SK) in the BMW F series from the following ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
• Read the long ISN (SK) in the BMW E and F series on the bench in factory mode.
• DME / DDE does not have to be opened (only Autohex II can perform this function)
• CAS1, CAS2, CAS3 and CAS3 + write-protected ISN and SK key programming for E and F series (CAS1, CAS2, CAS3, CAS3 +, CAS4, CAS4 +, FEM, BDC)
• Perform diagnostic and service functions of Autohex II (reading and deleting error codes, data stream values, activations, resetting the adaptation, ...)
• Use BMW ISTA-D for Autohex II WVCI (BMW ISTA-D driver) Unlock the secrecy of BDC and FEM to: change BDC and FEM-VIN, change BDC and FEM-ISN, mileage for BDC and reset FEM and create a key for BDC and FEM. Read the ISN of MSD85, MSD87, MSV90 in the F series.
• Ecu cloning / tuning for a variety of brands. This function is free for 90 days (Check Supported Ecu List).
• Reading and writing CAS 1,2,3,4 EEPROM and FLASH 100% safe with the HexTag tool.
• Read and write other modules from the BDM protocol from BMW, Mercedes, Audi and others with the HexTag tool.
• Change the KOMBI mileage with the HexTag tool. Renew all BMW keys and many other brands with the HexTag tool.
